Model | Travel | Capacity | Height | Platform Size | End/Side Capacity | Up Speed | Motor | Voltage | Ship* Weight | Quote Form |
MIN | MAX | STD | MAX |
DXS30-5 | 30" | 500 lbs | 6.75" | 36.75" | 16" x 24" | 30" x 36" | 500 lbs | 35 sec | 0.33 HP | 115/1/60 | 350 lbs | Quote |
DXS30-10 | 30" | 1,000 lbs | 6.75" | 36.75" | 16" x 24" | 30" x 36" | 1,000 lbs | 37 sec | 0.33 HP | 115/1/60 | 360 lbs | Quote |
DXS36-10 | 36" | 1,000 lbs | 7.5" | 43.5" | 24" x 36" | 36" x 48" | 1,000 lbs | 40 sec | 0.33 HP | 115/1/60 | 460 lbs | Quote |
DXS36-15 | 36" | 1,500 lbs | 7.5" | 43.5" | 24" x 36" | 36" x 48" | 1,500 lbs | 42 sec | 0.33 HP | 115/1/60 | 480 lbs | Quote |
DXS48-10 | 48" | 1,000 lbs | 7.5" | 55.5" | 24" x 48" | 36" x 60" | 1,000 lbs | 47 sec | 0.33 HP | 115/1/60 | 600 lbs | Quote |
DXS48-15 | 48" | 1,500 lbs | 7.5" | 55.5" | 24" x 48" | 36" x 60" | 1,500 lbs | 48 sec | 0.33 HP | 115/1/60 | 650 lbs | Quote |
DXS60-20 | 60" | 2,000 lbs | 12.5" | 72.5" | 24" x 53" | 42" x 66" | 1,000 lbs | 14 sec | 3 HP | 208/230/460 | 1,100 lbs | Quote |
*Standard platforms only.
Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.
Electrical Options:
- Hand Operated NEMA 4 - weather resistant control with an 8' cord
- NEMA -1 Foot Control - foot operated control
- Hand Held NEMA 4 with 20' Coil Cord
- Wall Mounted Control
- Limit Switch
- Pedestal Mounted Controls
Hydraulic Options:
- External / Remote Power Units
- 1 HP Single Phase
- Convert 1 HP 115 V single phase to 1.5 HP Three Phase with 1 or 2 GPM pump
- External 5 HP Three Phase
- 1.5 HP Three Phase
- 3 HP & 5 HP motor/pump units
- Air Motors
- Fire Resistant Hydraulic Fluid
- Low temp hydraulic fluid
- Velocity Fuse
Mechanical Options:
- Oversized Platform
- Platform with Beveled Edges
- Electro-Mechanical Toe Guard
- Pit Mounted Units
- Lifting Eyes
- Ball Transfer Tops. Add 2.75" to lowered height.
- Fork Pockets
- Turntables
- Detent Stops for Turntables
- Conveyor Top
- Optional Top Material
- High Cycle Motor
|