Lift Products LPBLE-SG

LPBLE-SG Stainless Galvanized "E" Lift Tables

The advantage of the E-Lift is the center opening measures 28.9" which is ideal for a standard 27" wide pallet truck. The added center support of the E-Lift is designed to help prevent the pallet from deflecting downward in the center due to the wider center area. The center support is shorter than the outside legs to allow easier access with the pallet truck.

Installation costs are reduced since the need for a floor pit is eliminated. The Stainless Galvanized E-Lift features:

Stainless Steel Platform & Base
Cold Galvanized Scissor Frame Assembly
Stainless Steel Pins
Steel-It Epoxy Cylinders
IP55 Electrical Connections
Remote Power Unit (RPU)
Optional RPU in Stainless Washdown Box

Ships From:
US Map Wisconsin

Wisconsin

Made By:

Request Quote

Model	Travel	Capacity	Height		Platform Size	Base Frame	Lift Speed	Motor	Quote Form
Model	Travel	Capacity	MIN	MAX	Platform Size	Base Frame	Lift Speed	Motor	Quote Form
LPBLE-20-1-SG	30.75"	2,200 lbs	3.125"	33.875"	55.875" x 50"	54" x 52"	18 sec	1 HP	Quote

The floor mount power unit has the pump motor and tank on the plate frame. This is ideal for placing the power unit under a conveyor or work bench or when locations are required. Features 8' hoses, power cord and control cord. Three-button control box has 115 voltage single phase standard on 2,200 lb. capacity units. 230/460 voltage three phase on 3,300 lb. units.

Standard Features Include:

Upper platform fitted with safety perimeter which prevents descent on contact with obstructions
Upper limit switch
External power unit equipped with a relief valve against overloading and a compensated flow valve for controlling lowering speed. Supplied with 8 ft. long hoses
115 voltage single phase standard on 2,200 lb capacity units
Low tension (24v) control box with up-down buttons
Single acting cylinders with drainage system and check valve to stop the lift from lowering in
Safety clearance between scissors to prevent trapping during operations
Mechanical blocks for safe maintenance operations
Self-lubricating bushings on pivot points
Removable lifting eye(s) to facilitate handling and installation of the lift table Bearings

Remote Power Unit in Stainless Box

Lift Products Guardian E-Lift Owner's Manual (PDF 1.63MB)

Related Product Lines

Lift Products LPBL-SG
	Type:	Stainless : Low
	Capacity:	1,100 - 3,300 lbs
	Travel:	29.5" - 30.75"
	Down Height:	3.25" - 3.625"
	Up Height:	33.125" - 34"
	Min Platform:	31.5" x 55"
	Max Platform:	39.5" x 61"

Lift Products LPBLU-SG
	Type:	Stainless : Low
	Capacity:	2,200 - 3,300 lbs
	Travel:	29.5" - 30.75"
	Down Height:	3.125" - 3.625"
	Up Height:	33.875"
	Min Platform:	45.625" x 59.875"
	Max Platform:	55.875" x 50"

Lift Products SXTLP-25
	Type:	Stainless : Ground
	Capacity:	2,500 lbs
	Travel:	36.5"
	Down Height:	0.5"
	Up Height:	37"
	Platform:	48" x 42"
	Base Size:	48.25" x 54.75"

Lift Products E-Lift
	Type:	Low : Rampless
	Capacity:	2,200 lbs
	Travel:	30.75"
	Down Height:	3.125"
	Up Height:	33.875"
	Min Platform:	55.875" x 50"
	Base Frame:	54" x 52"

Quick Quote

Call 877-860-3620 & tell us your requirements or Request Quote

View All Products

View all products of this category View Products

Search By Specification

Search over 2,000 lift tables by 9 different specs Search Now

Solution Dynamics, Inc. BBB Business Review

Name:		Country:		State/Prov:		Zip:
Company:		Email:		Phone:		Ext: