Guardian Lift-N-Spin

Lift Products Guardian Series Lift-N-Spin

With a lowered height of only 4.25", The Lift-N-Spin can be loaded with a manual or electric pallet truck. This is accomplished by the exclusive auto-transition plate. The Lift-N-Spin has a raised height of 35". This is an ideal height for work positioning applications. The rotating top avoids the need to walk around or reach across.

The "Guardian" Series meets and exceeds both U.S. (ANSI) and European safety standards.

Ships From:
US Map Wisconsin

Wisconsin

Made By:

Request Quote

Model	Travel	Capacity	Height		Platform Size	Base Frame	Lift Speed	Motor	Quote Form
Model	Travel	Capacity	MIN	MAX	Platform Size	Base Frame	Lift Speed	Motor	Quote Form
LPBL-20-2-LS	30.75"	2,000 lbs	4.25"	35"	39.5" x 55"	29" x 52.75"	18 sec	1 HP	Quote

	Exclusive Auto-Transition Plate is a key feature of the Lift-N-Spin. This Auto-Transition Plate provides a smooth surface from the ramp onto the rotating top. Once the lift is raised 1/4" the Auto-Transition Plate automatically lowers to allow the spinning of the rotating top. When the table is fully lowered the Auto-Transition Plate automatically raises again to provide a smooth surface to load the next pallet.
		With a lowered height of only 4-1/4", The Lift-N-Spin can be loaded with a manual or electric pallet truck.

Remote Power Unit features a 1 HP motor. This is a highly efficient and quiet pump motor combination.

A three-button control box has 115-volt single phase and runs on a 20 amp circuit. 230/460 3 phase is optional.

Standard Features Include:

Upper platform fitted with safety perimeter, which prevents descent on contact with obstructions
Low-tension (24V) control box with up-down buttons. In addition the "Guardian" Series includes an electric circuit reset button in case the safety perimeter is actuated
New design external power pack equipped with a relief valve against overloading and a compensated flow valve for controlling lowering speed. The power pack is supplied with hoses 8' long
115 voltage single phase standard . 230/460 voltage three phase is available as an option
Upper limit switch

Single acting cylinders with drainage system and check valve to stop the lift table lowering in case of hose burst
Safety clearance between scissors to prevent trapping during operations
Mechanical blocks for safe maintenance operations
Self-lubricating bushings on pivot points
Removable lifting eye(s) to facilitate handling and installation of the lift table
Motor 1 HP

The optional loading ramp comes in 3 standard sizes: 36", 42", or 48". Custom ramp sizes are available.

Lift Products Lift-N-Spin Product Literature (PDF 707KB)
Lift Products Lift-N-Spin Owner's Manual (PDF 969KB)

Related Product Lines

Bishamon EZ-Off
	Type:	LP : Rotating
	Capacity:	2,500 lbs
	Travel:	28.25"
	Down Height:	1.75"
	Up Height:	30"
	Platform:	40.5" Diameter
	Voltage:	115V

Guardian Low Profile
	Type:	Low Profile
	Capacity:	1,100 - 3,300 lbs
	Travel:	29.5" - 30.75"
	Down Height:	3.25" - 3.625"
	Up Height:	33.125" - 34"
	Min Platform:	31.5" x 55"
	Max Platform:	39.5" x 61"

Lift Products Roto-Max
	Type:	Rotating
	Capacity:	2,500 - 3,500 lbs
	Travel:	26"
	Down Height:	6.5"
	Up Height:	32.5"
	Platform:	43" Diameter"
	Base Frame:	30" x 45"

Lift Products U-Lift
	Type:	LP : Rampless
	Capacity:	2,200 - 3,300 lbs
	Travel:	29.5" - 30.75"
	Down Height:	3.125" - 3.625
	Up Height:	33.125" - 33.875"
	Min Platform:	44.875" x 56"
	Max Platform:	45.625" x 59.875

Quick Quote

Call 877-860-3620 & tell us your requirements or Request Quote

View All Products

View all products of this category View Products

Search By Specification

Search over 2,000 lift tables by 9 different specs Search Now

Solution Dynamics, Inc. BBB Business Review

Name:		Country:		State/Prov:		Zip:
Company:		Email:		Phone:		Ext: