- Extremely low collapsed heights of 2.9" to 4.3" provides access for rolling products, carts or pallet trucks
- Single acting cylinders with drainage system and check valve to stop the lift from lowering in case of hose burst
- Safety clearance between scissors to prevent trapping during operations
- Removable lifting eye(s) to facilitate handling and installation of the lift table Bearings
- Extremely low collapsed heights of 2.9" to 4.3" provides access for rolling products, carts or pallet trucks
- Upper platform fitted with safety perimeter which prevents descent on contact with obstructions
- External power unit equipped with a relief valve against overloading and a compensated flow valve for controlling lowering speed. Supplied with 8 ft. long hoses
- 115 voltage single phase standard on 1,100 lb and 2,200 lb capacity units
- 230/460 volt 3 phase standard on 3,300 lb units
- Mechanical blocks for safe maintenance operations
- Low tension (24v) control box with up-down buttons
- Self-lubricating bushings on pivot points
- Upper limit switch
- 1 HP Motor
|