G-Series 2G-2849

Lift Products 2G-2849 Light Duty Lift Table

The G-Series Lift Tables have been designed as an economical solution for light duty applications. The G-Series table can improve productivity and reduce injuries by placing loads at an ergonomic work height.

The heavy duty 1.7 HP lift motor allows up to 12 full lifts per hour on average, with a competitive lift speed and runs on a 115 volt input 15 amp circuit. The G-Series is the right table for many applications. The G-Series tables are stock items and can usually ship in 24 hours.

Ships From:
US Map Wisconsin

Wisconsin

Made By:

Request Quote

Specifications

Model	Travel	Capacity	Height		Platform Size	Base Size	Speed		Motor	Ship Weight
Model	Travel	Capacity	MIN	MAX	Platform Size	Base Size	Lift	Lower	Motor	Ship Weight
2G-2849	32"	2,000 lbs	8"	40"	28" x 49"	24.75" x 46"	18.5 sec	17.6 sec	1.7 HP	400 lbs

Features

	Built In Maintenance Bar The Table includes built-in Flip Down Bars on each side of the outer scissors arms. These bars are to be flipped down while performing maintenance or inspection.	Upper Platform Full Perimeter Safety which prevents descent upon contact with an obstruction Low Tension (24v) control box with up and down buttons. In addition, The G-Series includes an electric circuit reset button in case safety perimeter bar is activated Upper limit switch shuts motor off at full height extension reducing wear on lift cylinder and motor Single acting lift cylinder with flow control to prevent fast lowering in case of hose burst Lifetime lubricated bearings on lift arms 1.7 HP 115 volt motor with low amp draw and reliable performance Runs on a standard 15 amp circuit
	Exclusive 1.7 HP Motor This intentionally oversized motor performs at a competitive lift speed with low amp draw. The high torque low RPM (1,700) lift motor is ETL-Rated. This 1.7 HP motor is energy efficient, can run on a standard 15 amp circuit, and also features a very quiet operation.
	Full Perimeter Safety Bar The full perimeter bar stops the table from lowering if it comes in contact with any obstruction. This feature improves safety when the table is used next to machinery, packing tables, work benches or other items when the table could cause entrapment while lowering. To reactivate the table the operator must reset the button on the control box.