Lift-Tables.net Logo Top Curve
Presented By Solution Dynamics, Inc. 877-860-3620
location :: home : mechanical : stationary : hamaco : mlp

Hamaco MLP

MLP Mechanical Lift

MLP High Efficiency Mechanical Lift

  • IPM motor (Interior Permanent Magnet)
  • Vector control
  • Dry ball screw cylinder
  • No oil leaks
  • No hydraulic drift
  • 110 V single phase power supply
  • Built-in power unit
  • Max starting frequency 10 times per minute
  • Enhanced rigidity with cam-type cylinder head
  • Enhanced durability through strengthening the axis
  • Max/min limit switch
  • Foot switch with LED cord: 78.7"
  • 118.1" Power cord
Ships From:
US Map Georgia
Georgia
Made By:
Hamaco Logo
Request Quote
ModelTravelCapacityHeightPlatform
Size		Lift/Lower
Speed		WeightQuote
Form
LoweredRaised
MLP-100-4719.4"220 lbs3.4"22.8"15.7" x 28.3"10 sec86 lbsQuote
MLP-100-5819.4"220 lbs3.4"22.8"20.5" x 33.5"10 sec93 lbsQuote
MLP-150-4513.5"330 lbs3.4"16.9"15.7" x 19.7"10 sec68 lbsQuote
MLP-150-5613.5"330 lbs3.4"16.9"20.5" x 24.8"10 sec77 lbsQuote
MLP-250-4716.2"550 lbs6.2"22.4"15.7" x 28.3"20 sec99 lbsQuote
MLP-250-5816.2"550 lbs6.2"22.4"20.5" x 33.5"20 sec110 lbsQuote
MLP-250-69V-1223.5"550 lbs4"27.5"23.6" x 35.4"14 sec220 lbsQuote
MLP-250-610V-1228.2"550 lbs4"32.2"23.6" x 41.3"18 sec254 lbsQuote
MLP-250-89V-1223.5"550 lbs4"27.5"31.5" x 37.4"14 sec232 lbsQuote
MLP-250-810V-1228.2"550 lbs4"32.2"31.5" x 41.3"18 sec276 lbsQuote
MLP-500-610V-1228.2"1,100 lbs5.4"33.6"23.6" x 41.3"14 sec331 lbsQuote
MLP-500-612V-1232.1"1,100 lbs5.4"37.5"25.6" x 47.2"15 sec353 lbsQuote
MLP-500-810V-1228.2"1,100 lbs5.4"33.6"31.5" x 41.3"14 sec353 lbsQuote
MLP-500-812V-1232.1"1,100 lbs5.4"37.5"31.5" x 47.2"15 sec375 lbsQuote
MLP-1000-610V-1222.7"2,200 lbs6.2"28.9"25.6" x 41.3"25 sec331 lbsQuote
MLP-1000-612V-1228.6"2,200 lbs6.2"34.8"25.6" x 47.2"32 sec397 lbsQuote
MLP-1000-810V-1222.7"2,200 lbs6.2"28.9"31.5" x 41.3"25 sec342 lbsQuote
MLP-1000-812V-1228.6"2,200 lbs6.2"34.8"31.5" x 47.2"32 sec408 lbsQuote
Hamaco lifts utilize a ball screw driving system, making them exceptionally compact and easily able to adapt to any work environment. This dry cylinder method, rather than hydraulics, virtually eliminates leaks and enhances performance. Additionally, they feature brushless motors for much greater longevity and simple maintenance.
Parts of Ball Screw Ball Screw Control Board Foot Controls
Parts of ball-screw Ball-screw Microcomputer control Foot switch (with LED)
  • Lower Cost - Costs less to purchase and maintain than hydraulic models.
  • No Leaking - Using a dry clyinder, there's no oil leakage and the work environment stays clean.
  • Longer Life - With a brushless motor design, it is not prone to typical wear and tear and will last significantly longer
  • Precision Positioning - The ball-screw design makes it possible to perfectly position the lifts to your exact needs as well as to keep levels steady when loading or unloading the tables.
  • No Hydraulic Lift - Table height stays steady and consistent even when leaving it fully loaded for long periods of time.
  • Quiet - Hamaco motors are quiet during operation, eliminating additional workplace noise.
  • LED Alarm - A LED alarm on the foot switch alerts you to operational troubles.
  • Easy Maintenance - Because of the simplified, clean design, such as long-life brushless motors and leak-free operation, maintenance is minimal and easy.
  • Built-In Power Unit - Lifters use a built-in power unit enabling you to use them anywhere.
  • High Quality Foot Switch - Made of durable, rigid plastic, the foot switch is two-toned (UP: black and DOWN: red) to make it easy to use even in low light. Switch is water resistant.
  • Consistent Speed Control - By controlling the amount of current through the motor, we are able to accurately control the rotation speed.
  • Ultra-Efficient - Because of the significant efficiency advantages over hydraulic, the lifters are able to use smaller output motors to handle large loads.
IPM Motor

Structure of the IPM (interior permanent magnet) motor

A conventional SPM (surface permanent magnet) motor has a structure in which a permanent magnet is attached to the rotor surface. It only uses magnetic torque from a magnet. On the other hand, the IPM motor uses reluctance through magnetic resistance in addition to magnetic torque by imbedding a permanent magnet in the rotor itself.

Example SPM / IPM Motor Rotor Structure

Magnetic Motor Diagram 		High torque & high efficiency
High torque and high output is achieved
by using reluctance torque in addition
to magnetic torque.

Energy- saving operation
It consumes up to 30% less power compared to conventional SPM motors.

High- speed rotation
It can respond to high-speed motor rotation by controlling the two types of torque using vector control.

Safety
Since the permanent magnet is embedded, mechanical safety is improved as, unlike in a SPM, the magnet will not detach due to centrifugal force.
  • Bellows Skirting (On select models)
  • Three Button Hand Controls (Up / Down / Stop)
  • Two Button Hand Controls (Up / Down)
Related Product Lines
Hamaco ML
Hamaco ML Type:Mechanical
Capacity:220 - 330 lbs
Travel:13.7" - 19.6"
Down Height:3.2"
Up Height:16.9" - 22.8"
Min Platform:15.7" x 19.7"
Max Platform:20.5" x 33.5"
Hamaco MLM
Hamaco MLM Type:Mechanical
Capacity:220 - 550 lbs
Travel:16.8" - 33.4"
Down Height:5.2" - 7.9"
Up Height:22" - 41.3"
Min Platform:15.7" x 25.6"
Max Platform:20.5" x 33.5"
Hamaco MLSB
Hamaco MLSB Type:Mechanical
Capacity:220 lbs
Travel:19.6" - 25.5"
Down Height:3.2"
Up Height:22.8" - 28.7"
Min Platform:7.9" x 27.6"
Max Platform:11.8" x 35.4"
ECOA Myti-Lift
ECOA Myti-Lift Type:Compact
Capacity:500 - 1,000 lbs
Travel:30"
Down Height:6"
Up Height:36"
Min Platform:12" x 24"
Max Platform:24" x 36"
Quick Quote
Call 877-860-3620 & tell us your requirements or Request Quote
View All Products
View all products of this category View Products
Search By Specification
Search over 2,000 lift tables by 9 different specs Search Now
Solution Dynamics, Inc. BBB Business Review
Copyright 2021 Solution Dynamics, Inc | Toll Free: 877-860-3620 | Phone: 262-521-5730 | Fax: 262-521-5733 | Email Us | Follow Us on: