Model | Travel | Capacity | Height | Platform Size | Base Frame | Edge Loads* | Lift Speed | Cylinders | Motor | Ship Weight* | |||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MIN | MAX | STD | MAX | Static | Rolling | ||||||||
TSL-60-162 | 162" | 6,000 lbs | 42" | 204" | 60" x 88" | 84" x 108" | 60" x 84" | 3,000 lbs | 2,000 lbs | 80 sec | 2 | 4.8 HP | 7,300 lbs |
*Note: Standard platforms only.
Oversized platforms, beveled toeguards, roller shades, accordion skirting and electrical tape switches will affect overall size. Power requirements depend upon frequency and type of operation and require specific selection. 1.5HP Power Units are internal as standard equipment. 3HP and 4.8HP Power Units are remote as standard equipment. Standard power supply for 1.5HP Power Unit is 230V/1PH/60Hz. Optional power supply for 1.5HP Power Unit is 208/230/460/3PH/60Hz. 115V/1PH/60Hz. Power Supply requires a 20 amp circuit. Standard power supply required for 3 and 4.8HP is 230/460/3PH/60Hz. Optional power supply for 3 and 4.8HP Power Units is 230/1PH/60 Hz (increases upspeed by 33%).
Note: Where available power supply is 208V/3PH, booster transformers are required for 240V/3PH for 3HP and 4.8HP motors, see options. Conforms to or exceeds ANSI standard MH29.1-1994.
|
|
Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.
Electrical Options:
|
|
![]() |
![]() |