ECOA TAD-30-806

ECOA Trans-A-Dok TAD-30-806 Loading Dock Lift

ECOA TAD Series Loading Docks are portable loading docks, designed for use wherever a permanently installed unit is not practical. Load capacities are 3,000 to 5,000 lbs., travel distances to 55 in. with platform sizes of 72 x 72 to 72 x 96 in. or 96 x 72 in.

Portability of the TAD Series comes from a detachable dolly jack and flip-up/flip-down wheels to provide 1.5 in. underclearance when moving the empty lift.

Ships From:
US Map Flordia

Flordia

Made By:

Request Quote

Specifications

Model	Travel	Capacity	Height		Platform Size	Axle Load Max		Up Speed (F.P.M.)	Motor Std. HP	Cylinders	Ship Weight
Model	Travel	Capacity	MIN	MAX	Platform Size	Ends	Sides	Up Speed (F.P.M.)	Motor Std. HP	Cylinders	Ship Weight
TAD-30-806	55"	3,000 lbs	5"	60"	96" x 72"	1,500 lbs	1,500 lbs	6	1.5 HP	3	2,700 lbs

Standard Power Supply required is 230V/1PH/60Hz. For operation on 115V power supply it is necessary to provide a separate 30 amp circuit and adequate wiring to assure an actual 115V at the motor contactor during full load operation. Specify if 115V is required. Three phase motor linestarter and transformer are available as options. The width of the platform is always the direction across the scissor legs, and the length is the direction of the scissor legs.

Features

Alternate transfer arrangements easily accomplished
Internally-mounted 1.5HP, 115/230V, 1PH, 60Hz TENV intermittent duty super torque motor. Specify required voltage
24V operating control voltage
NEMA-4X constant-pressure (water-tight, oil-tight and corrosion-resistant) "UP-DOWN" pushbutton control with 10 ft. coiled cord
NEMA-12 prewired control box (dust/drip-tight industrial type) with liquid-tight electrical connectors. Control box contains magnetic starter, control transformer, thermal overload and fuses
All controller components are UL and/or CSA approved
Upper travel limit switch to automatically shut off motor and pump at pre-set height
15 ft. power cord with connector plug
Four-way safety treadplate deck, straight toeguards with black and yellow safety stripes
Steel approach ramp, 30 x 60 in., hinged, with 2 lifting chains
Steel bridge plate, 18 x 60 in., hinged with 2 lifting chains
Four safety chains with snap hooks

Removable steel handrail 42 in. high with midrail and 4 in. high toeboard
Rectangular, structural tube scissor legs
Hinged safety restraint maintenance bars
Surfaces degreased, oxide primed and finished with two coats of enamel
Detachable dolly jack and flipup/flip-down wheels for portability
Hard, chrome-plated, polished shafting, hydraulic rams and axles at pivot points
Hydraulic velocity fuse at base of each cylinder
Lifetime, self-lubricating, antifriction bearings at all pivot points
Internal high-pressure gear pump with check valve, relief valve, pressure-compensated flow control valve, solenoid valve, suction and return filters
Includes hydraulic oil

Options

Two second warning bell with adjustable voulme control
Flashing red light
Auto wheel chock in ramp
Oil reservoir immersion heater with thermostat control
208/230/460V/3PH/60Hz 3 phase power unit
Aluminun bridge plate 16" x 60"
Aluminum approach ramp 30" x 60"
Steel bridge plate 18" x 60"
Larger power unit for faster lift speed

Literature

ECOA TAD Product Literature (PDF 88KB)

Quick Quote

Call 877-860-3620 & tell us your requirements or Request Quote

View All Models

View all models of this product series View Models

Search By Specification

Search over 2,000 lift tables by 9 different specs Search Now

Solution Dynamics, Inc. BBB Business Review

Name:		Country:		State/Prov:		Zip:
Company:		Email:		Phone:		Ext: