ECOA TAD-S2-60-708

ECOA Trans-A-Dok TAD-S2-60-708 Loading Dock Lift

ECOA TAD-S2 Trans-A-Dok Series loading docks are high speed, high axle load, self contained mobile or stationary lifts that require no pit or concrete work. As mobile units, they can be easily moved to service several locations. Load capacities are 5,000 to 8,000 lbs., travel distances are 54 in. with platform sizes from 72 x 72 to 84 x 120 in.

A detachable dolly and wheels make the TAD-S2 easily portable. If the installation is to be permanent, the unit can be lag bolted to the surface of existing concrete.

Ships From:
US Map Flordia

Flordia

Made By:

Request Quote

Specifications

Model	Travel	Capacity	Height		Platform Size	Axle Load Capacity Over			Width	Speed (F.P.M.)			Motor Std. HP	Ship Weight
Model	Travel	Capacity	MIN	MAX	Platform Size	Bridge Ends	End Opp Bridge	Sides	Width	Empty	Loaded	Down	Motor Std. HP	Ship Weight
TAD-S2-60-708	54"	6,000 lbs	6"	60"	84" x 96"	4,200 lbs	3,200 lbs	3,200 lbs	93"	12	9	15	3 HP	2,550 lbs

Standard power supply is 230V/3PH/60Hz. See Options for alternate power supply. Ship weight is approximate and includes platform and power unit. Power requirements depend upon frequency and type of operation and require specific selection. If required voltage is 208V/3PH/60Hz, booster transformers must be furnished. See options.

Features

Alternate transfer arrangements easily accomplished
Internally-mounted 1.5HP, 115/230V, 1PH, 60Hz TENV intermittent duty super torque motor. Specify required voltage
24V operating control voltage
NEMA-4X constant-pressure (water-tight, oil-tight and corrosion-resistant) "UP-DOWN" pushbutton control with 10 ft. coiled cord
NEMA-12 prewired control box (dust/drip-tight industrial type) with liquid-tight electrical connectors. Control box contains magnetic starter, control transformer, thermal overload and fuses
All controller components are UL and/or CSA approved
Upper travel limit switch to automatically shut off motor and pump at pre-set height
15 ft. power cord with connector plug
Four-way safety treadplate deck, straight toeguards with black and yellow safety stripes
Steel approach ramp, 30 x 60 in., hinged, with 2 lifting chains
Steel bridge plate, 18 x 60 in., hinged with 2 lifting chains
Four safety chains with snap hooks

Removable steel handrail 42 in. high with midrail and 4 in. high toeboard
Rectangular, structural tube scissor legs
Hinged safety restraint maintenance bars
Surfaces degreased, oxide primed and finished with two coats of enamel
Detachable dolly jack and flipup/flip-down wheels for portability
Hard, chrome-plated, polished shafting, hydraulic rams and axles at pivot points
Hydraulic velocity fuse at base of each cylinder
Lifetime, self-lubricating, antifriction bearings at all pivot points
Internal high-pressure gear pump with check valve, relief valve, pressure-compensated flow control valve, solenoid valve, suction and return filters
Includes hydraulic oil

Options

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Two second warning bell with adjustable voulme control
Flashing red light
3 HP 230 Volt 1 Phase 60 Hz Power Unit
Remote Power Unit with 15'0" Hydraulic Hose & Limit Switch Wire
Pop-Up Wheel Chock on Ramp End of Platform
Oil reservoir immersion heater with thermostat control
Tow-Eye System; Dolly Jack has additional Tow-Eye to be attached to fork truck for towing
Aluminun bridge plate 18" x 60"
Aluminum approach ramp 36" x 60"
Steel bridge plate 18" x 60"
Upper Travel Limit Switch
Transformer for Boosting Power from 208V/3PH/60Hz to 240V/3PH/60Hz (2 required)

Literature

ECOA TAD-S2 Product Literature (PDF 79KB)

Quick Quote

Call 877-860-3620 & tell us your requirements or Request Quote

View All Models

View all models of this product series View Models

Search By Specification

Search over 2,000 lift tables by 9 different specs Search Now

Solution Dynamics, Inc. BBB Business Review

Name:		Country:		State/Prov:		Zip:
Company:		Email:		Phone:		Ext: