ECOA Magnum MLT-20-60 Super Heavy Duty Lift Table

Specifications

Model	Travel	Capacity	Height		Platform Size		Base Frame	Edge* Loads	Up Speed	Cylinders	Motor	Ship** Weight
Model	Travel	Capacity	MIN	MAX	STD	MAX	Base Frame	Edge* Loads	Up Speed	Cylinders	Motor	Ship** Weight
MLT-20-60	60"	20,000 lbs	20"	80"	48" x 84"	72" x 108"	48" x 84"	16,000 lbs	45 sec	2	5 HP	4,300 lbs

*Note: Load that can be rolled over the side or end in any raised position. (Standard platform only). **Note: Standard platforms only.

Oversized platforms, beveled toeguards, roller shades, accordion skirting and electrical tape switches will affect overall size. Power requirements depend upon frequency and type of operation and require specific selection. Note: Where available power supply is 208V/3PH booster transformers are required for 240V/3PH at motor, see options. Conforms to or exceeds ANSI standard MH29.1-1994.

Features

Externally-mounted power unit with 5HP, 230/460V, 3PH, 60Hz, continuous duty TEFC motor. (Specify required voltage)
High-pressure gear pump
NEMA-4X constant-pressure (water-tight, dust-tight and corrosion-resistant) "UP-DOWN" pushbutton control station with 20 ft. coil cord and hanger bracket
NEMA-12 prewired control box (dust/drip-tight industrial type) with liquid-tight electrical connectors. Control box contains magnetic starter, control transformer, thermal overload and fuses
All controller components are UL and/or CSA approved
24V operating control voltage
NEMA 4, 13 (water-tight, dusttight and oil-tight) adjustable upper travel limit switch to automatically shut off motor and pump at pre-set height, plus 2 secondary mechanical upper travel back-up stops
Smooth steel platform
Rectangular structural tube scissor legs and torque tubes for maximum horizontal and longitudinal stability and minimal deflection
Pressure line 25 micron cartridge filter
8 in. straight toeguards with yellow and black safety stripes
Dual safety restraint maintenance bars
Flow Limiter Valve at base of each cylinder

Positive stops on all four corners for maximum roll over capacity in lowered position
Cylinder rod end protectors
Surfaces degreased, oxide primed and finished with two coats of enamel
Sealed, ram-type, full oil displacement hydraulic cylinders with hard, chrome-plated and polished stress-proof steel rams and polyurethane seals with internal stops. No breather ports
Axles and shafts are stressproof shafting, hard chrome plated and polished, retained with a positive locking screw ring system and equipped with lifetime PTFE lined, composite bearings
Aluminum valve block manifold in the external power unit contains check valve, relief valve, pressurecompensated flow control valve and down solenoid valve cartridges. The solenoid valve includes a filter screen
Hydraulic hose, SAE 100 R2AT double wire braid from cylinders to universal connection in the base frame
11 gal. reservoir, hydraulic oil not included

Options

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Electrical Options: Up-Down Push Button Station Push Button mounted on platform with Disconnect Plug Key Operated Up-Down Selector Up-Down Push Button with Key Lockout Foot Operated Control Limit Switch Booster Transformers (2 required for 3PH Power Supply) Flashing Red Light Two Second Up-down Warning Bell with Volume Control Electric Toeguards, Tapeswitch	Mechanical Options: Steel 42" high Handrail with Midrail/Toeboard Roll-Up Safety Skirting Accordion Bellows Skirts Portability Beveled Toeguards for pit mounting Safety Treadplate Conveyor Tops
Hydraulic Options: Manual Down Valve Adjustable Flow Control Down Valve Larger Power Unit for faster lift speeds External, Heavy-Duty, Continuous Running Motor Power Unit with Integral Directional Valving & Large Capacity Reservoir Explosion Proof Power Unit-External Quick Disconnect Couplings

Literature

ECOA MLT Product Literature (PDF 415KB)

Name:		Country:		State/Prov:		Zip:
Company:		Email:		Phone:		Ext:

ECOA MLT-20-60

ECOA Magnum MLT-20-60 Super Heavy Duty Lift Table