ECOA HLT2DW-120-48 Double Wide Lift Table

Specifications

Model	Travel	Capacity	Height		Platform Size		Base Frame	Edge Load Max		Lift Speed	Cylinders	Motor	Ship* Weight
Model	Travel	Capacity	MIN	MAX	STD	MAX	Base Frame	Static	Rolling	Lift Speed	Cylinders	Motor	Ship* Weight
HLT2DW-120-48	48"	12,000 lbs	8"	55"	48" x 64"	72" x 96"	47.5" x 63"	3,500 lbs	2,345 lbs	83 sec	4	1.5 HP	2,550 lbs

*Note: Standard platforms only.

Oversized platforms, beveled toeguards, roller shades, accordion skirting and electrical tape switches will affect overall size. Power requirements depend upon frequency and type of operation and require specific selection. If available power supply is 115V/1PH/60Hz, a .75 HP motor is required. This will double the upspeed. Internal 3 phase power unit 208V/230V/460 available. Optional Hi-Speed 3HP 208V/230V/460V/3PH/60Hz power unit available. Speeds for Hi-Speed units will be 2/3 greater than speeds specified (multiply by 0.67). Lowered height is 8" minimum for 3HP power unit.

Features

Internally-mounted 1.5HP, 230V, 1PH, 60Hz or 1.5HP, 115V, 1PH, 60 Hz or 208/230/460V, 3PH, 60Hz intermittent duty TENV super torque motor. Specify required voltage
All controller components are UL and/or CSA approved
24V operating control voltage
NEMA-4X constant-pressure (water-tight, oil-tight and corrosion-resistant) "UP-DOWN" pushbutton control station with 8 ft. straight cord
Cylinders with internal stops
10 ft. power cord (connector plug not included)
Smooth steel tops
Hard, chrome-plated, polished shafting, hydraulic cylinder piston rods and axles
Surfaces degreased, oxide primed and finished with two coats of enamel

3.75 in. straight toeguards with yellow and black safety stripes
Lifetime self-lubricating, PTFE lined, composite bearings
Includes hydraulic oil
Safety restraint maintenance bars
Internal high-pressure gear pump, check valve, relief valve, pressure-compensated flow control valve, solenoid valve, suction and return filters
Optional Programmable Logic Controller (PLC) operates integral power unit- enables a large array of different plug & play options

Options

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Electrical Options:

Up-Down Push Button Station
Push Button mounted on platform with Disconnect Plug
Key Operated Up-Down Selector
Up-Down Push Button with Key Lockout
Foot Operated Control
Limit Switch
Booster Transformers (2 required for 3PH Power Supply)
Flashing Red Light
Two Second Up-down Warning Bell with Volume Control
Electric Toeguards, Tapeswitch
Momentary contact controls for automatic up and down operation with upper and lower limit switches and Up-Down-Stop Push Button Control Station
Photo Electric Cell Leveling (Unstacking/Stacking-Specify, 1 Direction Only)
Whisker Switch Leveling (Unstacking/Stacking-Specify, 1 Direction Only)

Hydraulic Options:

Manual Down Valve
Adjustable Flow Control Down Valve
Larger Power Unit for faster lift speeds
Remote Power Units with 5'0" hydraulic hose
Three Phase Power Unit (.75HP or 1.5HP) and Linestarter, Transformer
Air Operated Power Unit Complete 95 psi @ 60 cfm (1 HP)
External, Heavy-Duty, Continuous Running Motor Power Unit with Integral Directional Valving & Large Capacity Reservoir
Explosion Proof Power Unit-External
Quick Disconnect Couplings

Mechanical Options:

Steel Approach Ramp
Steel 42" high Handrail with Midrail/Toeboard
Roll-Up Skirting
Accordion Bellows Skirts
Outboard Mounting of Casters w/Standard Lowered Height
Straight Toeguards for surface mounting
Beveled Toeguards for pit mounting
Safety Treadplate
USDA accepted epoxy coatings for Lift Platform
Stainless Steel Platform Overlay
Ball Transfer Top
Conveyor Tops
(2) Retractable Wheels and (2) Wheel Dolly Jack to 6,500 lbs. Steel Wheels
(2) Fixed Wheels and (2) Wheel DollyJack to 12,000 lbs. Steel Wheels
(4) "V" Groove, or Single Flanged Steel Wheels or (2) combined with (2) Flat Steel Wheels, Mounted off sides or ends
(2) Fixed and (2) Swivel Wheels
Integrally Mounted Floor Lock

Literature

ECOA HLT2DW Product Literature (PDF 349KB)

Name:		Country:		State/Prov:		Zip:
Company:		Email:		Phone:		Ext: