Lift-Tables.net Logo Top Curve
Presented By Solution Dynamics, Inc. 877-860-3620
location :: home : tandem : double long : ecoa : hlt2dl : hlt2dl-040-36

ECOA HLT2DL-040-36

ECOA HLT2DL

ECOA HLT2DL-040-36 Double Long Lift

ECOA HLT2DL Series Lift Tables are heavy-duty electro-hydraulic, with doublelong scissor legs for users requiring longer platforms with greater end stability in a rugged, extra-long configuration. Load capacities are 4,000 to 10,000 lbs., travel distances are 24 to 48 in. with platform sizes of 24 x 72 to 48 x 176 in.

All ECOA Lift Tables are designed and constructed for heavy-duty applications under the toughest working conditions, offering years of trouble-free operation.
Ships From:
US Map Flordia
Flordia
Made By:
ECOA Logo
Request Quote
Specifications
ModelTravelCapacityHeightPlatform SizeBase
Frame		Edge Loads*Up
Speed		CylindersMotorShip*
Weight
MINMAXSTDMAXStaticRolling
HLT2DL-040-3636"4,000 lbs7.125"43"24" x 96"48" x 144"23.5" x 95"3,000 lbs2,010 lbs20 sec21.5 HP1,320 lbs

*Note: Standard platforms only.

Oversized platforms, beveled toeguards, roller shades, accordion skirting and electrical tape switches will affect overall size. Power requirements depend upon frequency and type of operation and require specific selection.

Standard power supply required: 230V/1PH/60Hz. If available power supply is 115V/1PH/60Hz, a 3/4 HP motor is required. This will double the upspeed. Alternate internal 3 phase power unit 208V/230V/460V available.

Features
  • Internally-mounted 1.5HP, 230V, 1PH, 60Hz or 11/2 HP, 115V, 1PH, 60 Hz or 208/230/460V, 3PH, 60Hz intermittent duty TENV super torque motor. Specify required voltage
  • All controller components are UL and/or CSA approved
  • 24V operating control voltage
  • NEMA-4X constant-pressure (water-tight, oil-tight and corrosion-resistant) "UP-DOWN" push button control station with 8 ft. straight cord
  • 10 ft. power cord (connector not included)
  • Cylinders with internal stops
  • Smooth steel tops
  • Lifetime self-lubricating, PTFE composite bearings
  • Hinged safety restraint maintenance bars
  • Includes hydraulic oil
  • Hard, chrome-plated, polished shafting, hydraulic cylinder piston rods and axles
  • Surfaces degreased, oxide primed and finished with two coats of enamel
  • 3.75 in. straight toeguards with yellow and black safety stripes
  • Internal high-pressure gear pump with check valve, relief valve, pressure-compensated flow control valve, solenoid valve, suction and return filters
  • Optional Programmable Logic Controller (PLC) operates integral power unit-enables a large array of plug & play options
Options

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Electrical Options:
  • Up-Down Push Button Station
  • Push Button mounted on platform with Disconnect Plug
  • Key Operated Up-Down Selector
  • Up-Down Push Button with Key Lockout
  • Foot Operated Control
  • Limit Switch
  • Booster Transformers (2 required for 3PH Power Supply)
  • Flashing Red Light
  • Two Second Up-down Warning Bell with Volume Control
  • Electric Toeguards, Tapeswitch
  • Momentary contact controls for automatic up and down operation with upper and lower limit switches and Up-Down-Stop Push Button Control Station
  • Photo Electric Cell Leveling (Unstacking/Stacking-Specify, 1 Direction Only)
  • Whisker Switch Leveling (Unstacking/Stacking-Specify, 1 Direction Only)
Hydraulic Options:
  • Manual Down Valve
  • Adjustable Flow Control Down Valve
  • Larger Power Unit for faster lift speeds
  • Remote Power Units with 5'0" hydraulic hose
  • Three Phase Power Unit (.75HP or 1.5HP) and Linestarter, Transformer
  • Air Operated Power Unit Complete 95 psi @ 60 cfm (1 HP)
  • External, Heavy-Duty, Continuous Running Motor Power Unit with Integral Directional Valving & Large Capacity Reservoir
  • Explosion Proof Power Unit-External
  • Quick Disconnect Couplings
Mechanical Options:
  • Steel Approach Ramp
  • Steel 42" high Handrail with Midrail/Toeboard
  • Roll-Up Skirting
  • Accordion Bellows Skirts
  • Outboard Mounting of Casters w/Standard Lowered Height
  • Straight Toeguards for surface mounting
  • Beveled Toeguards for pit mounting
  • Safety Treadplate
  • USDA accepted epoxy coatings for Lift Platform
  • Stainless Steel Platform Overlay
  • Ball Transfer Top
  • Conveyor Tops
  • (2) Retractable Wheels and (2) Wheel Dolly Jack to 6,500 lbs. Steel Wheels
  • (2) Fixed Wheels and (2) Wheel DollyJack to 12,000 lbs. Steel Wheels
  • (4) "V" Groove, or Single Flanged Steel Wheels or (2) combined with (2) Flat Steel Wheels, Mounted off sides or ends
  • (2) Fixed and (2) Swivel Wheels
  • Integrally Mounted Floor Lock
Literature
Quick Quote
Call 877-860-3620 & tell us your requirements or Request Quote
View All Models
View all models of this product series View Models
Search By Specification
Search over 2,000 lift tables by 9 different specs Search Now
Solution Dynamics, Inc. BBB Business Review
Copyright 2021 Solution Dynamics, Inc | Toll Free: 877-860-3620 | Phone: 262-521-5730 | Fax: 262-521-5733 | Email Us | Follow Us on: