ECOA HLT4-035-60 Hydraulic Lift Table

Specifications

Model	Travel	Capacity	Height		Platform Size		Base Frame	Edge Loads		Up Speed	Motor	Cylinder	Ship Weight
Model	Travel	Capacity	MIN	MAX	STD	MAX	Base Frame	Static	Rolling	Up Speed	Motor	Cylinder	Ship Weight
HLT4-035-60	60"	3,500 lbs	8"	68"	48" x 88"	72" x 108"	47.625" x 83"	3,500 lbs	2,345 lbs	32 sec	1.5 HP	2	1,525 lbs

Features


Hinged safety maintenance bars	Entrapped rollers	Optional PLC operated power unit	Contoured Scissor Legs

Single-acting cylinders with positive internal stops are fastened at the rod end sleeve with removable axles for enhanced maintainability
Heavy-duty welded construction designed with a 3-to-1 safety factor, complies with ANSI MH29.1-1994
PTFE (Teflon) lined, composite bearings at all wear points. Hardened chrome plated axles used at all bearing surfaces
Scissor Legs bolted to base frame and platform at fixed (clevis) end, for enhanced maintainability and ease of disassembly, if required
1.5HP, 230V-460V/3PH or 230V/1PH integral power unit. Optional 1.5HP, 115V/1PH power unit available
Optional Programmable Logic Controller (PLC) operates integral power unit and enables a wide array of plug & play options
Smooth steel tops
Includes hydraulic oil

HLTx Lifts have the scissor leg roller entrapped within the base frame and platform for superior stability
Hinged safety maintenance bars
Surfaces degreased, oxide primed and finished with two coats of durable enamel
Safety striping and warning decals meet or exceed OSHA requirements
Contoured Scissor Legs
24V operating control voltage
NEMA-4X constant-pressure (water-tight, oil-tight and corrosion-resistant) "UP-DOWN" pushbutton control station with 8 ft. straight cord
10 ft. power cord (connector not included)
Hard, chrome-plated, polished shafting, hydraulic cylinder piston rods and axles
Internal high-pressure gear pump with check valve, relief valve, pressure-compensated flow control valve, solenoid valve, suction and return filters

Options

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Electrical Options:

Up-Down Push Button Station
Push Button mounted on platform with Disconnect Plug
Key Operated Up-Down Selector
Up-Down Push Button with Key Lockout
Foot Operated Control
Limit Switch
Booster Transformers (2 required for 3PH Power Supply)
Flashing Red Light
Two Second Up-down Warning Bell with Volume Control
Electric Toeguards, Tapeswitch
Momentary contact controls for automatic up and down operation with upper and lower limit switches and Up-Down-Stop Push Button Control Station
Photo Electric Cell Leveling (Unstacking/Stacking-Specify, 1 Direction Only)
Whisker Switch Leveling (Unstacking/Stacking-Specify, 1 Direction Only)

Hydraulic Options:

Manual Down Valve
Adjustable Flow Control Down Valve
Larger Power Unit for faster lift speeds
Remote Power Units with 5'0" hydraulic hose
Three Phase Power Unit (.75HP or 1.5HP) and Linestarter, Transformer
Air Operated Power Unit Complete 95 psi @ 60 cfm (1 HP)
External, Heavy-Duty, Continuous Running Motor Power Unit with Integral Directional Valving & Large Capacity Reservoir
Explosion Proof Power Unit-External
Quick Disconnect Couplings

Mechanical Options:

Steel Approach Ramp
Steel 42" high Handrail with Midrail/Toeboard
Roll-Up Skirting
Accordion Bellows Skirts
Outboard Mounting of Casters w/Standard Lowered Height
Straight Toeguards for surface mounting
Beveled Toeguards for pit mounting
Safety Treadplate
USDA accepted epoxy coatings for Lift Platform
Stainless Steel Platform Overlay
Ball Transfer Top
Conveyor Tops
(2) Retractable Wheels and (2) Wheel Dolly Jack to 6,500 lbs. Steel Wheels
(2) Fixed Wheels and (2) Wheel DollyJack to 12,000 lbs. Steel Wheels
(4) "V" Groove, or Single Flanged Steel Wheels or (2) combined with (2) Flat Steel Wheels, Mounted off sides or ends
(2) Fixed and (2) Swivel Wheels
Integrally Mounted Floor Lock

Literature

ECOA HLTx Product Literature (PDF 495KB)

Name:		Country:		State/Prov:		Zip:
Company:		Email:		Phone:		Ext: