Lift-Tables.net Logo Top Curve
Presented By Solution Dynamics, Inc. 877-860-3620
location :: home : high capacity : ecoa : hh : hh-100-60

ECOA HH-100-60

ECOA HH Lift Table

ECOA HH-100-60 High Capacity Scissor Lift Table

ECOA HH Heavy Duty Series Lift Tables are heavy-duty electro-hydraulic scissor lifts designed and constructed for heavy-duty applications under the toughest working conditions, offering years of trouble-free operation.
Ships From:
US Map Flordia
Flordia
Made By:
ECOA Logo
Request Quote
Specifications

ModelTravelCapacityHeightPlatform SizeBase
Frame
Edge Loads*Up
Speed
MotorCylinderShip*
Weight
MINMAXSTDMAXStaticRolling
HH-100-6060"10,000 lbs10"70"36" x 84"48" x 102"35.5" x 84"7,000 lbs4,690 lbs45 sec5 HP31,950 lbs

*Standard platforms only.

Oversized platforms, beveled toeguards, roller shades, accordion skirting and electrical tape switches will affect overall size. Power requirements depend upon frequency and type of operation and require specific selection.

Features

  • External 5HP, 208/230/460V, 3PH, 60Hz, continuous duty rated motor. Please specify required voltage
  • NEMA-4X constant-pressure (water-tight, dust-tight and corrosion-resistant) "UP-DOWN" pushbutton control station with 8 ft. straight cord
  • NEMA-12 prewired controls (dust/drip-tight industrial type) with liquid-tight electrical connectors. The control box contains magnetic starter, control transformer, thermal overload and fuses
  • All controller components are UL and/or CSA approved
  • Optional 3HP 230V/1PH/0Hz power unit available
  • Optional NEMA 4, 13 (watertight, dust-tight and oil tight) adjustable upper travel limit switch to automatically shut off motor and pump at pre-set height
  • 10 ft. power cord (connector not included)
  • Hard, chrome-plated, polished shafting, hydraulic cylinder piston rods and axles
  • 24V operating control voltage
  • Smooth steel tops
  • Surfaces degreased, oxide primed and finished with two coats of enamel
  • 5.25 in. straight toeguards with yellow and black safety stripes on all four sides
  • Hinged safety restraint maintenance bars
  • Lifetime self-lubricating, PTFE lined, composite bearings
  • Internal high-pressure gear pump with check valve, relief valve, pressure-compensated flow control valve, solenoid valve, suction and return filters
  • Single-acting cylinders with positive internal stops are fastened at the rod end sleeve with removable axles for enhanced maintainability
  • Includes hydraulic oil
Options

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Electrical Options:
  • Up-Down Push Button Station
  • Push Button mounted on platform with Disconnect Plug
  • Key Operated Up-Down Selector
  • Up-Down Push Button with Key Lockout
  • Foot Operated Control
  • Limit Switch
  • Booster Transformers (2 required for 3PH Power Supply)
  • Flashing Red Light
  • Two Second Up-down Warning Bell with Volume Control
  • Electric Toeguards, Tapeswitch
  • Momentary contact controls for automatic up and down operation with upper and lower limit switches and Up-Down-Stop Push Button Control Station
  • Photo Electric Cell Leveling (Unstacking/Stacking-Specify, 1 Direction Only)
  • Whisker Switch Leveling (Unstacking/Stacking-Specify, 1 Direction Only)
Hydraulic Options:
  • Manual Down Valve
  • Adjustable Flow Control Down Valve
  • Larger Power Unit for faster lift speeds
  • Remote Power Units with 5'0" hydraulic hose
  • Three Phase Power Unit (.75HP or 1.5HP) and Linestarter, Transformer
  • Air Operated Power Unit Complete 95 psi @ 60 cfm (1 HP)
  • External, Heavy-Duty, Continuous Running Motor Power Unit with Integral Directional Valving & Large Capacity Reservoir
  • Explosion Proof Power Unit-External
  • Quick Disconnect Couplings
Mechanical Options:
  • Steel Approach Ramp
  • Steel 42" high Handrail with Midrail/Toeboard
  • Roll-Up Skirting
  • Accordion Bellows Skirts
  • Outboard Mounting of Casters w/Standard Lowered Height
  • Straight Toeguards for surface mounting
  • Beveled Toeguards for pit mounting
  • Safety Treadplate
  • USDA accepted epoxy coatings for Lift Platform
  • Stainless Steel Platform Overlay
  • Ball Transfer Top
  • Conveyor Tops
  • (2) Retractable Wheels and (2) Wheel Dolly Jack to 6,500 lbs. Steel Wheels
  • (2) Fixed Wheels and (2) Wheel DollyJack to 12,000 lbs. Steel Wheels
  • (4) "V" Groove, or Single Flanged Steel Wheels or (2) combined with (2) Flat Steel Wheels, Mounted off sides or ends
  • (2) Fixed and (2) Swivel Wheels
  • Integrally Mounted Floor Lock
Literature

Quick Quote
Call 877-860-3620 & tell us your requirements or Request Quote
View All Models
View all models of this product series View Models
Search By Specification
Search over 2,000 lift tables by 9 different specs Search Now
Solution Dynamics, Inc. BBB Business Review
Copyright 2021 Solution Dynamics, Inc | Toll Free: 877-860-3620 | Phone: 262-521-5730 | Fax: 262-521-5733 | Email Us | Follow Us on: