ECOA CLT-02-48-L Compact Heavy Duty Lift Table

Specifications

Model	Travel	Capacity	Height		Platform Size		Base Frame	Edge Loads*		Up Speed	Cylinders	Motor	Ship* Weight
Model	Travel	Capacity	MIN	MAX	STD	MAX	Base Frame	Static	Rolling	Up Speed	Cylinders	Motor	Ship* Weight
CLT-02-48-L	48"	2,000 lbs	8.5"	56.5"	24" x 60"	48" x 84"	22.5" x 56"	1,000 lbs	670 lbs	20 sec	1	.75 HP Int	700 lbs

*Standard platforms only.

Oversized platforms, beveled toeguards, roller shades, accordion skirting and electrical tape switches will affect overall size. Power requirements depend upon frequency and type of operation and require specific selection.

Features

Base and platform rollers are retained inside the channel frames
Internally or externally mounted .75HP, 115/230 V, 1PH, 60Hz or 208/230/460V, 3PH, 60Hz intermittent duty TENV super torque motor. Specify required voltage
24V operating control voltage
NEMA-4X constant-pressure (water-tight, oil-tight and corrosionresistant) "UP-DOWN" pushbutton control station with 8 ft. straight cord
NEMA-12 prewired controls (dust/drip-tight industrial type) with liquid-tight electrical connectors. Control box contains magnetic starter, control transformer, thermal overload and fuses
All controller components are UL and/or CSA approved
10 ft. power cord (connector not included)
Cylinders with internal stops

Hard, chrome-plated, polished shafting, hydraulic cylinder piston rods and axles
Surfaces degreased, oxide primed and finished with two coats of enamel
Smooth steel tops
3.75 in. straight toeguards with yellow and black safety stripes
Lifetime self-lubricating,PTFE lined, composite bearings
Safety restraint maintenance bars
Internal high-pressure gear pump with check valve, relief valve, pressure-compensated flow control valve, solenoid valve, suction and return filters
Includes hydraulic oil

Options

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Electrical Options:

Up-Down Push Button Station
Push Button mounted on platform with Disconnect Plug
Key Operated Up-Down Selector
Up-Down Push Button with Key Lockout
Foot Operated Control
Limit Switch
Booster Transformers (2 required for 3PH Power Supply)
Flashing Red Light
Two Second Up-down Warning Bell with Volume Control
Electric Toeguards, Tapeswitch
Momentary contact controls for automatic up and down operation with upper and lower limit switches and Up-Down-Stop Push Button Control Station
Photo Electric Cell Leveling (Unstacking/Stacking-Specify, 1 Direction Only)
Whisker Switch Leveling (Unstacking/Stacking-Specify, 1 Direction Only)

Hydraulic Options:

Manual Down Valve
Adjustable Flow Control Down Valve
Larger Power Unit for faster lift speeds
Remote Power Units with 5'0" hydraulic hose
Three Phase Power Unit (.75HP or 1.5HP) and Linestarter, Transformer
Air Operated Power Unit Complete 95 psi @ 60 cfm (1 HP)
External, Heavy-Duty, Continuous Running Motor Power Unit with Integral Directional Valving & Large Capacity Reservoir
Explosion Proof Power Unit-External
Quick Disconnect Couplings

Mechanical Options:

Steel Approach Ramp
Steel 42" high Handrail with Midrail/Toeboard
Roll-Up Skirting
Accordion Bellows Skirts
Straight Toeguards for surface mounting
Beveled Toeguards for pit mounting
Safety Treadplate
USDA accepted epoxy coatings for Lift Platform
Stainless Steel Platform Overlay
Ball Transfer Top
Conveyor Tops
Integrally Mounted Floor Lock

Literature

ECOA CLT Product Literature (PDF 349KB)

Name:		Country:		State/Prov:		Zip:
Company:		Email:		Phone:		Ext: