36XLR5248-20

Autoquip 36XLR5248-20 Ground Entry Lift Table

Collapsable to a mere 1/2-inch, and boasting an industry-lowest 4-inch reach-over, Autoquip's XLR family of hydraulic scissors lifts provide easy operator access to pallets and loads being assembled over the side of the scissors lift. Low reach-over also provides the smallest footprint of any pan-style lift in the industry.

Common work station or process applications for this family of scissors tables include work positioning, parts assembly and disassembly, and cart positioning - all with improved ergonomics, increased worker productivity, and higher factory throughput.

Ships From:
US Map Oklahoma

Oklahoma

Made By:

Request Quote

Specifications

Model	Travel	Capacity	Height		Platform Size	Base Frame	Side Loads	Speed		Cylinders	Motor	Weight
Model	Travel	Capacity	MIN	MAX	Platform Size	Base Frame	Side Loads	Up	Down	Cylinders	Motor	Weight
36XLR5248-20	36"	2,000 lbs	0.5"	36.5"	52" x 48"	60" x 60"	1,000 lbs	24 sec	24 sec	2	1.5 HP	1,030 lbs

Features

Joints feature chrome-plated, 100,000 psi, ultimate-strength pins for premium load strength and long life.
Minimum 1/2-inch-thick steel platform minimizes deck deflection and maximizes load stability.
Solid steel legs and added stiffeners provide overall stability and straight, repeatable roller tracking.
Autoquip offers an industry-best 2 year warranty on all parts.
On-board maintenance devices enable maintenance crews to safely and effectively block open the scissors during inspection.
Maintenance-free bearings at pivot points require no lubrication.
Vertically-mounted cylinders are easily accessed for inspection and maintenance.
Semi-transparent polyurethane oil reservoir provides an easily visible method of checking fluid levels.
Double wire braided Parker hydraulic hoses resist wear, abrasion, and leaks.
High-strength steel rollers are easily replaced, minimizing downtime.
Hydraulic power unit is located at the end of the base frame for easy access during inspection and repair.
An industry-low 4-inch reach-over the sides of the lift keeps all work within the ergonomic "power zone."
1/2-inch collapsed height increases the total ergonomic range - minimizing bending and improving worker productivity.
Standard controls are prewired and internal power unit is onboard.
Near-zero lowered height is easily accessed by pallet jacks and other wheeled loads.
Hinged ramp at the front of the lift also serves as a toe guard.
Hydraulic velocity fuses completely stop lifts in the unlikely event of uncontrolled descent due to sudden hose rupture.
Minimum 3:1 structural factor of safety makes these lifts the most structurally sound lift in the industry.
Compliance with recognized standards:
- ANSI MH29.1 - Safety Requirements for Industrial Scissors Lifts
- NFPA 70 - National Electric Code
- ASTM - A36 - Structural Steel Standard
- ANSI Z535 - Safety Labeling Requirements
- AWS D.1 - Welding Standards
- Applicable portions of OSHA 29CFR1910 - General workplace safety

Options

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Platform Options:

Electric Toe Guards
Photoeye Toe Indicator

Electrical Options:

Guarded Up/Down Foot Switch
Upper/Lower Travel Limit Switch
Key Lockout Switch
115 Volt Controls
NEMA-12 Enclosure
115 Volt AC Down Solenoid Coil
24 Volt DC Down Solenoid Coil
Magnetic Push Button Station
Up/Down Push Button Station
Hook for Pushbutton
Weatherproof Push Button
Audible Signal w/Volume Adjust
Flashing Red Light
Twist Lock
No Controls

Power Unit Options:

Remote Power Units
Wall Mounting Brackets
Cover for Remote Power Unit
Int. 3/4 HP Single Phase Power Unit
Hydraulic Hose Quick Disconnect
Remote Air Operated Power Unit
Hand Operated Up/Down Control
Foot Operated Up/Down Air Valve
Water Glycol
Food Grade Oil
Biodegradable Oil
Dipstick
Manual Valve Off Pressure Line
Oil Immersion Heater
Sight Gauge
Connection Hose
No Power Unit & No Controls

Gates & Enclosures

Single Swing Gates
Biparting Swing Gates
Single Panel Vertical Acting Gates
Bi Panel Vertical Acting Gates
Horizontal Sliding Gates
Panels (standard 96" high)
Interlocks

Paint Options:

Black, Brown, Machinery Grey, Blue
Match Color
Safety Colors: Orange or Yellow
Epoxy Paint
Steel-it
Primer Only
Tile Clad Epoxy

Literature

Autoquip XLR Product Literature (PDF 257KB)
Autoquip XLR Owner's Manual (PDF 707KB)
Autoquip XLR Drawing (PDF 255KB)

Quick Quote

Call 877-860-3620 & tell us your requirements or Request Quote

View All Models

View all models of this product series View Models

Search By Specification

Search over 2,000 lift tables by 9 different specs Search Now

Solution Dynamics, Inc. BBB Business Review

Name:		Country:		State/Prov:		Zip:
Company:		Email:		Phone:		Ext: