Autoquip 84LL70QD

Autoquip 84LL70QD Super Titan Quad Lift Table

The Super Titan Quad family touts the heaviest lifting capabilities of all Autoquip products. With Autoquip's Super Titan at its core, the Super Titan Quad lifts give you nearly four times the platform size and lifting capacity. It begins by fusing 4 four heavy-duty Super Titan scissor lifts end-to-end and side-to-side to form one Super Titan Quad lift.

Engineered for high efficiency, the Super Titan Quad lift provides unmatched strength and the lowest possible collapsed height. These scissor lifts also safely control oversized loads while maintaining minimal platform deflection. And, lifetime lubricated bearings and direct-thrust lifting cylinders provide long-lasting solutions for the heaviest in-plant lifting problems.

Ships From:
US Map Oklahoma

Oklahoma

Made By:

Request Quote

Specifications

Model	Travel	Capacity	Height		Platform Size		Base Frame	Speed		Cylinders	Motor	Weight
Model	Travel	Capacity	MIN	MAX	STD	MAX	Base Frame	Up	Down	Cylinders	Motor	Weight
84LL70QD	84"	70,000 lbs	15.5"	99.5"	84" x 226"	96" x 264"	84" x 226"	73 sec	73 sec	4	5 HP	11,200 lbs

Features

Joints feature chrome-plated, 100,000 psi, ultimate-strength pins for premium load strength and long life.
Thick steel-reinforced platform minimizes deck deflection, maximizes load stability, and extends the life of the platform deck.
Solid steel leg and added stiffeners provide optimal overall stability and straight, repeatable tracking of the rollers as the lift raises and lowers.
Hydraulic velocity fuses completely stop lifts in the unlikely event of uncontrolled descent due to sudden hose rupture.
Minimum 3:1 structural factor of safety makes these lifts the most structurally sound lift in the industry.
On-board maintenance devices enable maintenance crews to safely and effectively block open the scissors during inspection.
Efficient and highly serviceable hydraulic power unit.
Maintenance-free bearings at pivot points require no lubrication.
High-strength steel rollers are easily replaced, minimizing downtime.
Standard controls are prewired and internal power unit is onboard.
Exceptionally low lowered height allows on and off load flexibility.
Double wire braided Parker hydraulic hoses resist wear, abrasion, and leaks.
Autoquip offers an industry-best 2 year warranty on all parts as a promise that you've purchased the industry's most reliable lift.
Compliance with recognized standards:
- ANSI MH29.1 - Safety Requirements for Industrial Scissors Lifts
- NFPA 70 - National Electric Code
- ASTM - A36 - Structural Steel Standard
- ANSI Z535 - Safety Labeling Requirements
- AWS D.1 - Welding Standards
- Applicable portions of OSHA 29CFR1910 - General workplace safety

Options

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Platform Options:

Larger Platform Sizes
Throw Over Bridge
Approach Ramp
Shuttle Deck
Accordion Skirts
Handrails
Special Platform Shapes
"V" Deck
Conveyor
4 way Non Skid Tread Plate
Bevel Toe Guard
Electric Toe Guards
Stainless Steel Platform
Stainless Steel Skin
Lifting Eyes

Baseframe Accessories:

Anchor Clips

Power Unit Options:

Remote Power Units
Wall Mounting Brackets
Cover for Remote Power Unit
Hydraulic Hose Quick Disconnect
Water Glycol
Food Grade Oil
Biodegradable Oil
Dipstick
Continuous Running Pump
Manual Valve Off Pressure Line
Oil Immersion Heater
Sight Gauge
Connection Hose
No Power Unit & No Controls

Gates & Enclosures

Single Swing Gates
Biparting Swing Gates
Single Panel Vertical Acting Gates
Bi Panel Vertical Acting Gates
Horizontal Sliding Gates
Panels (standard 96" high)
Interlocks

Electrical Options:

Upper/Lower Travel Limit Switch
Key Lockout Switch
115 Volt Controls
NEMA-12 Enclosure
115 Volt AC Down Solenoid Coil
24 Volt DC Down Solenoid Coil
Magnetic Push Button Station
Up/Down Push Button Station
Hook for Pushbutton
Weatherproof Push Button
Audible Signal w/Volume Adjust
Flashing Red Light
No Controls

Paint Options:

Black, Brown, Machinery Grey, Blue
Match Color
Safety Colors: Orange or Yellow
Epoxy Paint
Steel-it
Primer Only
Tile Clad Epoxy

Literature

Autoquip Super Titan Product Literature (PDF 165Kb)
Autoquip Super Titan Owner's Manual (PDF 2.60MB)

Quick Quote

Call 877-860-3620 & tell us your requirements or Request Quote

View All Models

View all models of this product series View Models

Search By Specification

Search over 2,000 lift tables by 9 different specs Search Now

Solution Dynamics, Inc. BBB Business Review

Name:		Country:		State/Prov:		Zip:
Company:		Email:		Phone:		Ext: