Autoquip 24S25EXWDL Double Long Scissors Lift Table

Specifications

Model	Travel	Capacity	Height		Platform Size		Base Frame	Edge Loads		Speed		Cylinders	Motor	Weight
Model	Travel	Capacity	MIN	MAX	STD	MAX	Base Frame	End	Side	Up	Down	Cylinders	Motor	Weight
24S25EXWDL	24"	4,000 lbs	6.5"	30.5"	48" x 74"	72" x 98"	48" x 74"	4,000 lbs	2,500 lbs	32 sec	32 sec	4	1.5 HP	1,100 lbs

Features

Standard controls are prewired and internal power unit is onboard providing for easy installation.
Exceptionally low lowered height allows on and off load flexibility.
Single-piece, steel reinforced legs and a 1/4- to 3/8-inch-thick steel platform make for extremely solid construction and easy adaptability.
Joints feature chrome-plated, 100,000 psi, ultimate-strength pins for premium load strength and long life.
Solid steel leg and added stiffeners provide optimal overall stability and straight, repeatable tracking of the rollers as the lift raises and lowers.
Minimum 1/4-inch-thick steel-reinforced platform minimizes deck deflection, maximizes load stability, and extends the life of the platform deck.
Double set of scissors legs provides added load stability and worker safety.
Hydraulic velocity fuses completely stop lifts in the unlikely event of uncontrolled descent due to sudden hose rupture.
Minimum 3:1 structural factor of safety makes these lifts the most structurally sound lift in the industry.
On-board maintenance devices enable maintenance crews to safely and effectively block open the scissors during inspection.
Semi-transparent poly oil reservoir provides an easily visible method of checking fluid levels and eliminates oil contamination due to rust.
Double wire braided Parker hydraulic hoses resist wear, abrasion, and leaks.
Easy replacement of high-strength steel rollers minimizes downtime.
Autoquip offers an industry-best 2 year warranty on all parts as a promise that you've purchased the industry's most reliable lift.
Compliance with recognized standards:
- ANSI MH29.1 - Safety Requirements for Industrial Scissors Lifts
- NFPA 70 - National Electric Code
- ASTM - A36 - Structural Steel Standard
- ANSI Z535 - Safety Labeling Requirements
- AWS D.1 - Welding Standards
- Applicable portions of OSHA 29CFR1910 - General workplace safety

Options

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Platform Options:

Larger Platform Sizes
Accordion Skirts
Handrails
Special Platform Shapes
Throw Over Bridge
Approach Ramps
Shuttle Decks
"V" Deck
Conveyor
4 way Non Skid Tread Plate
Bevel Toe Guard
Electric Toe Guards
Photoeye Toe Indicator
Stainless Steel Platform
Stainless Steel Skin
Lifting Eyes

Baseframe Accessories:

Portablilty Set
Fixed Wheel Transport Base
Floor Lock
Locking Swivel Casters
Casters with Brake
Phenolic Surface Wheels
Anchor Clips
Built Up Baseframe
Fork Truck Pockets

Power Unit Options:

Remote Power Units
Wall Mounting Brackets
Cover for Remote Power Unit
Int. 5HP Intermittent Duty Motor
Int. 3/4 HP Single Phase Power Unit
Hydraulic Hose Quick Disconnect
Remote Air Operated Power Unit
Internal Air Operated Power Unit
Hand Operated Up/Down Control
Foot Operated Up/Down Air Valve
Tropical Duty Motor
Water Glycol
Food Grade Oil
Biodegradable Oil
Dipstick
Manual Valve Off Pressure Line
Oil Immersion Heater
Sight Gauge
Connection Hose
No Power Unit & No Controls

Gates & Enclosures

Single Swing Gates
Biparting Swing Gates
Single Panel Vertical Acting Gates
Bi Panel Vertical Acting Gates
Horizontal Sliding Gates
Panels (standard 96" high)
Interlocks

Electrical Options:

Guarded Up/Down Foot Switch
Upper/Lower Travel Limit Switch
Key Lockout Switch
115 Volt Controls
NEMA-12 Enclosure
115 Volt AC Down Solenoid Coil
24 Volt DC Down Solenoid Coil
Magnetic Push Button Station
Up/Down Push Button Station
Hook for Pushbutton
Weatherproof Push Button
Audible Signal w/Volume Adjust
Flashing Red Light
No Controls

Paint Options:

Black, Brown, Machinery Grey, Blue
Match Color
Safety Colors: Orange or Yellow
Epoxy Paint
Steel-it
Primer Only
Tile Clad Epoxy

High Cycle Package:

Cam followers with sealed tapered roller bearings
Replaceable hardened runner strips
special 'PTFE' filament wound bearings

Literature

Autoquip Series 35 Double Long Product Literature (PDF 1.0MB)
Autoquip Series 35 Double Long Owner's Manual (PDF 2.89MB)
Autoquip Series 35 Double Long Drawing (PDF 216KB)
Autoquip Series 35 Double Long Extra Wide Drawing (PDF 204KB)

Name:		Country:		State/Prov:		Zip:
Company:		Email:		Phone:		Ext:

Autoquip 24S25EXWDL

Autoquip 24S25EXWDL Double Long Lift Table