Autoquip PLTC-6050

Autoquip PLTC-6050 Dock Lift

Designed primarily for pit mounting, Autoquip's PLTC Dock Lift family extends from grade level to tackle most dock lifting needs.

With a hinged approach ramp, solid steel construction and safety features like removable handrails and platform 4-way tread plate covering, the PLTC is well suited for fork truck loading and unloading applications commonly found in the automotive, aerospace, and retail industries. Features such as lifetime lubricated bearings, and direct-thrust lifting cylinders provide reliable and safe answers for a variety of dock loading problems.

Ships From:
US Map Oklahoma

Oklahoma

Made By:

Request Quote

Specifications

Model	Travel	Capacity	Height		Platform Size		Base Frame	Edge Loads		Speed		Cylinders	Motor	Weight
Model	Travel	Capacity	MIN	MAX	STD	MAX	Base Frame	End	Side	Up	Down	Cylinders	Motor	Weight
PLTC-6050	60"	5,000 lbs	8"	68"	72" x 96"	96" x 120"	58" x 90"	3,000 lbs	2,500 lbs	12 fpm	12 fpm	2	5 HP	2,800 lbs

Please Note: Derate Edge Loads with Oversized Top.

Features

Joints feature chrome-plated, 100,000 psi, ultimate-strength pins for premium load strength and long life.
Solid steel leg and added stiffeners provide optimal overall stability and straight, repeatable tracking of the rollers as the lift raises and lowers.
Thick steel-reinforced platform minimizes deck deflection, maximizes load stability, and extends the life of the platform deck.
On-board maintenance devices enable maintenance crews to safely and effectively block open the scissors during inspection.
Maintenance-free bearings at pivot points require no lubrication.
Efficient and highly serviceable hydraulic power unit.
Double wire braided Parker hydraulic hoses resist wear, abrasion, and leaks.
Easy replacement of high-strength steel rollers minimizes downtime.
Autoquip offers an industry-best 1 year warranty on all parts as a promise that you've purchased the industry's most reliable lift.
Simple Up/Down pushbutton operation.
Throw-over bridge conveniently covers transition gaps.
Removable handrails allow for safe maneuvering of workers.
Beveled platform sides protect workers' feet and toes.
Hydraulic velocity fuses completely stop lifts in the unlikely event of uncontrolled descent due to sudden hose rupture.
Minimum 3:1 structural factor of safety makes these lifts the most structurally sound lift in the industry.
Compliance with recognized standards:
- ANSI MH29.1 - Safety Requirements for Industrial Scissors Lifts
- NFPA 70 - National Electric Code
- ASTM - A36 - Structural Steel Standard
- ANSI Z535 - Safety Labeling Requirements
- AWS D.1 - Welding Standards
- Applicable portions of OSHA 29CFR1910 - General workplace safety

Options

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Platform Options:

Larger Platform Sizes
Accordion Skirts
Handrails
Throw Over Bridge
Approach Ramps
Shuttle Decks
Smooth Plate
Added Rollover Capacity
Lifting Eyes
Night Locks
Automatic Mechanical Wheel Chock

Gates & Enclosures

Single Swing Gates
Biparting Swing Gates
Single Panel Vertical Acting Gates
Bi Panel Vertical Acting Gates
Horizontal Sliding Gates
Panels (standard 96" high)
Interlocks

Power Unit Options:

Remote Power Units
Wall Mounting Brackets
Cover for Remote Power Unit
Int. 5HP Intermittent Duty Motor
Hand Operated Up/Down Control
Tropical Duty Motor
Water Glycol
Food Grade Oil
Biodegradable Oil
Dipstick
Manual Valve Off Pressure Line
Oil Immersion Heater
Sight Gauge
Connection Hose
No Power Unit & No Controls

Baseframe Accessories:

Built Up Baseframe

Electrical Options:

Upper/Lower Travel Limit Switch
Key Lockout Switch
115 Volt Controls
NEMA-12 Enclosure
115 Volt AC Down Solenoid Coil
24 Volt DC Down Solenoid Coil
Hook for Pushbutton
Weatherproof Push Button
Audible Signal w/Volume Adjust
Flashing Red Light
Twist Lock
No Controls

Paint Options:

Black, Brown, Machinery Grey, Blue
Match Color
Safety Colors: Orange or Yellow
Epoxy Paint
Steel-it
Primer Only
Tile Clad Epoxy
Cold Galvanizing

Literature

Autoquip Dock Products Technical Reference (PDF 993KB)
Autoquip PLTC Owner's Manual (PDF 3.38MB)
Autoquip PLTC Drawing (PDF 239KB)
Autoquip PLTC Pit Drawing (PDF 277KB)
Autoquip Pit Drawing Detail (PDF 204KB)

Quick Quote

Call 877-860-3620 & tell us your requirements or Request Quote

View All Models

View all models of this product series View Models

Search By Specification

Search over 2,000 lift tables by 9 different specs Search Now

Solution Dynamics, Inc. BBB Business Review

Name:		Country:		State/Prov:		Zip:
Company:		Email:		Phone:		Ext: