American Lifts P-84-040SF Lift Table by Autoquip

Specifications

Model	Travel	Capacity	Height		Platform Size		Base Frame	Edge Loads		Speed		Cylinders	Motor	Weight
Model	Travel	Capacity	MIN	MAX	STD	MAX	Base Frame	End	Side	Up	Down	Cylinders	Motor	Weight
P-84-040SF	84"	4,000 lbs	10"	94"	31" x 72.63"	50" x 84.38"	31" x 72.63"	2,000 lbs	1,000 lbs	80 sec	20 sec	2	1 HP	2,745 lbs

Features

All scissors rollers are captured within structural steel channels to provide excellent load stability.
High impact, spiral wound bearings at every pivot point provide maintenance-free, rugged resistance to abrasion, impact, and uneven loads.
Structural cross-members at every pinned joint in the scissors assembly minimizes leg deflection.
All hydraulic cylinders contain two-piece, self-aligning piston rods that transmit minimal side forces to the cylinder hinges/pins.
Structural steel channels in all top and lower frames provide additional rigidity and resistance to twisting/bending of the lift under load.
Solid steel legs and added stiffeners provide overall stability and straight, repeatable roller tracking as the lift raises and lowers.
Joints feature chrome-plated, 100,000 psi, ultimate-strength pins for premium load strength and long life.
Minimum 1/4-inch-thick steel-reinforced platform minimizes deck deflection and maximizes load stability.
Autoquip offers an industry-best 2 year warranty on all parts as a promise that you've purchased the industry's most reliable scissor lift.
One-piece, removable center axle pin adds rigidity to the scissors mechanism and allows easy inspection and maintenance of the axle pin.
On-board maintenance devices enable maintenance crews to safely and effectively block open the scissors during inspection.
Semi-transparent poly oil reservoir provides an easily visible method of checking fluid levels and eliminates oil contamination due to rust.
Low pressure hydraulic circuit extends the life of all hydraulic components and puts less stress on the electric motor.
Double wire braided Parker hydraulic hoses resist wear, abrasion, and leaks.
Standard controls are prewired and internal power unit is onboard.
Hydraulic velocity fuses completely stop lifts in the unlikely event of uncontrolled descent due to sudden hose rupture.
Minimum 3:1 structural factor of safety makes these lifts the most structurally sound lift in the industry.
Compliance with recognized standards:
- ANSI MH29.1 - Safety Requirements for Industrial Scissor Lifts
- NFPA 70 - National Electric Code
- ASTM - A36 - Structural Steel Standard
- ANSI Z535 - Safety Labeling Requirements
- AWS D.1 - Welding Standards
- Applicable portions of OSHA 29CFR1910 - General workplace safety

Options

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Platform Options:

Larger Platform Sizes
Accordion Skirts
Handrails
"V" Deck
Conveyor
4 way Non Skid Tread Plate
Bevel Toe Guard
Electric Toe Guards
Stainless Steel Platform
Stainless Steel Skin
Lifting Eyes

Gates & Enclosures

Single Swing Gates
Biparting Swing Gates
Single Panel Vertical Acting Gates
Bi Panel Vertical Acting Gates
Horizontal Sliding Gates
Panels (standard 96" high)
Interlocks

Power Unit Options:

Cover for Remote Power Unit
Int. 3/4 HP Single Phase Power Unit
Hydraulic Hose Quick Disconnect
Remote Air Operated Power Unit
Hand Operated Up/Down Control
Foot Operated Up/Down Air Valve
Water Glycol
Food Grade Oil
Biodegradable Oil
Manual Valve Off Pressure Line
Connection Hose
3HP 3 Phase Pump Unit
Air Powered Hydraulic Pump
Continuous Running Pump Unit
External Pump Unit
Teledyne Hand Pump
Washdown (NEMA 4) Pump Unit
No Power Unit & No Controls

Baseframe Accessories:

Portablilty Set
Fixed Wheel Transport Base
Floor Lock
Locking Swivel Casters
Casters with Brake
Phenolic Surface Wheels
Anchor Clips
Built Up Baseframe
Fork Truck Pockets

Electrical Options:

Guarded Up/Down Foot Switch
Upper/Lower Travel Limit Switch
Key Lockout Switch
115 Volt Controls
NEMA-12 Enclosure
115 Volt AC Down Solenoid Coil
24 Volt DC Down Solenoid Coil
Magnetic Push Button Station
Up/Down Push Button Station
Hook for Pushbutton
Weatherproof Push Button
Audible Signal w/Volume Adjust
Flashing Red Light
No Controls

Paint Options:

Black, Brown, Machinery Grey, Blue
Match Color
Safety Colors: Orange or Yellow
Epoxy Paint
Steel-it
Primer Only
Tile Clad Epoxy

Literature

Autoquip Compact Product Literature (PDF 662Kb)
Autoquip Compact Owner's Manual (PDF 2.76MB)
Autoquip Compact Drawing (PDF 112KB)
Autoquip Compact Pit Drawing (PDF 44KB)

Name:		Country:		State/Prov:		Zip:
Company:		Email:		Phone:		Ext:

Autoquip P-84-040SF

American Lifts Compact Series by Autoquip